Click to open expanded view
400G CFP2‑DCO Coherent Transceiver 640km | LACF2‑DCO‑400G Link‑All
LACF2-DCO-400G
Product Highlights
✅ Dual‑rate coherent transceiver supporting 400G PM‑16QAM up to 640 km and 200G PM‑QPSK up to 2000 km over standard single‑mode fiber
✅ Integrated hardware OTN framer with configurable framer‑bypass mode, natively supports FlexO, OTU4, 100GE and 400GE client services
✅Compliant with CFP2 MSA hardware spec; hot‑pluggable 104‑pin electrical interface with duplex LC optical connector
✅Tunable C‑band DWDM laser, supports 75 GHz /100 GHz channel spacing for metro DWDM networking
✅Adopts Link‑All proprietary SD‑FEC to deliver superior OSNR performance and link margin
✅Typical power consumption: 33 W (framer enable), wide operating case temperature from 0 °C to 70 °C for carrier‑grade deployment
✅Rich MDIO‑based monitoring, alarm and control functions, compatible with CFP MSA management interface v2.6
✅Supports multi‑host electrical signaling including CEI‑56G‑VSR‑PAM4 and CEI‑28G‑MR‑NRZ for router and system integrator hosts
Compatible with
Cisco
Ciena
Juniper
H3C
Dell
HP
Or customized
Inquire Now
Specification
  Part Number   LACF2-DCO-400G
  Supply Voltage   3.2 V ~3.4 V (typ 3.3 V
  Max steady‑state supply current
  11.25 A
  Absolute max supply voltage   ‑0.3 V ~ 3.6 V
  High‑speed lane   AC‑coupled inside module, CML signaling
  Supported host signaling   FOIC1.2/1.4, OTL4.2/4.4, 100GAUI‑2/4, 400GAUI‑8
  Management interface   MDIO(MDC/MDIO),1.2 V LVCMOS
  Reference clock input   REFCLK differential CML; REFCLK = Host Baud Rate /160
  Receiver damage threshold:    +10 dBm
  Sensitivity reference
  400G PM‑16QAM: Rx OSNR ≥21 dB @Pre‑FEC‑BER
  Modulation   PM‑16QAM
  Baud Rate   65.91 GBaud
  Line‑side Rate   400 G
  Operating case temperature   0 °C ~70 °C
  Storage temperature   ‑40 °C ~ +85 °C
  Relative humidity(non‑condensing)   15 % ~85 %
  Form‑factor dimension   107.5 × 41.5 × 12.4 mm
  Optical connector   Duplex LC receptacle

Main Features

1. Hot pluggable 104 pin CFP2 MSA electrical interface, duplex LC optical receptacle

2. Transmission reach: >640 km@400G (PM 16QAM), >2000 km@200G (PM QPSK) over single mode fiber(SMF)

3. Supports DWDM channel spacing: 75 GHz / 100 GHz

4. Built in OTN framer; framer enable / framer bypass configurable mode

5. Modulation support: PM 16QAM (400G), PM QPSK (200G) with proprietary SD FEC

6. Single 3.3 V power supply; typical power consumption: 33 W (framer enable) / 30 W (framer bypass); max 36 W (framer on)

7. Operating case temperature: 0 °C ~ 70 °C

8.Host client interfaces: n×100G FlexO, n×OTU4, n×100GE, 400GE; compliant to CEI 28G MR NRZ, CEI 56G VSR PAM4 (FOIC, OTL, 100GAUI 2/4, 400GAUI 8)

9. Management: MDIO control interface, CFP MSA Management Interface Spec v2.6 (R06a) compliant; alarm, reset, TX DIS, RX LOS, MOD RSTn signals supported

10. Tunable C band laser; laser frequency range:190.69375 THz ~196.65625 THz (6.25 GHz grid)

11. Compliance: UL/EN/IEC 62368 1, IEC 60825 laser safety, Class B EMC, EU RoHS, ESD protection (±8 kV contact / ±15 kV air discharge)

12. Mechanical dimension: 107.5 mm × 41.5 mm ×12.4 mm, CFP2 MSA Hardware Spec Rev 1.0 complian


Application Scenarios

1. Metro DWDM transport networks: 400G/200G coherent trunk transmission over SMF, reach up to 640 km(400G) /2000 km(200G)

2. IP‑over‑DWDM / Router‑native DWDM: Direct insertion into router line‑cards without separate transponder shelves

3. OTN transport**: Carrying OTU4 / FlexO / 100GE /400GE services with built‑in OTN framer

4. Service‑provider metro aggregation & regional ring networks

5. Data‑Center Interconnect (DCI) for metro‑distance multi‑site data‑center connections

6. Carrier‑grade DWDM system integration for system integrator host boards


More Products
Products Centre, Browse products categories
More >>>>
Consult
Any questions, please contact us
Contact us >>>>
粤ICP备16040392号 Shenzhen Link-all Technology Co., Ltd, 2026 ©
CallQQProductsConsulting
whatsapp: (86) 136 823 233 60
+86 755 26508812