Click to open expanded view
QSFP‑DD 400GBASE‑FR4 Transceiver 2km SMF | IEEE 802.3cu & 100G Lambda MSA Compliant
LAQD-FR4
Product Highlights
✅. Fully standards‑compliant 400GBASE‑FR4 QSFP‑DD transceiver for 2 km intra‑data‑center single‑mode fiber links.
✅. Low‑power 9 W maximum power dissipation, well‑suited for high‑density router / switch line‑cards.
✅. Quad‑CWDM MUX/DEMUX design: carries full 400G traffic over one duplex LC fiber pair to save fiber resources.
✅. Built‑in RS(544,514) FEC enhances link margin under real‑world fiber impairments.
✅. CMIS4.0‑based real‑time DDMI monitoring: module temperature, supply voltage, laser bias, TX & RX optical power.
✅. Strict QSFP‑DD MSA rev5.0 mechanical and pin definition, supports hot‑swap on mainstream host equipment.
✅. Cost‑optimized short‑reach 400G solution for leaf‑spine data‑center fabrics, multi‑vendor interoperability with IEEE‑compliant hosts.
Compatible with
Cisco
Ciena
Juniper
H3C
Dell
HP
Or customized
Inquire Now
Specification

  Part Number
  LAQD‑FR4
  Form Factor   QSFP‑DD MSA rev5.0 compliant, hot‑pluggable
  Optical Receptacle   LC‑Duplex
  CWDM Wavelengths   1271 nm, 1291 nm, 1311 nm, 1331 nm
  Aggregate Bit Rate   425 Gbps
  Electrical Interface   8 × 53.125 Gbps PAM4 (400GAUI‑8)
  Modulation Format   PAM4
  FEC   RS(544,514), Pre‑FEC BER: 2.4 × 10⁻⁴
  Power Supply   +3.3 V; Recommended: 3.135V ~ 3.465V; Absolute Maximum: 3.6V
  Max Power Dissipation   9 W; Maximum supply current: 2.86 A
  Recommended Case Operating Temperature   0 °C ~ 70 °C
  Storage Temperature   -40 °C ~ 85 °C
  Relative Humidity   10‑85 %, non‑condensing
  Transmission Reach   Up to 2 km over G.652 single‑mode fiber
  DDMI Interface   I2C, CMIS 4.0 compliant
  Mechanical Dimension   127.86 mm × 18.35 mm × 8.5 mm

Main Features

1. 425 Gbps aggregate bit rate over duplex single‑mode fiber

2. 4‑duplex‑channel transmitters and PIN receivers integrated

3. Integrated 4‑CWDM lanes MUX / DEMUX (1271/1291/1311/1331 nm)

4. 8 × 53.125 Gbps PAM4 electrical interface (400GAUI‑8)

5. RS(544,514) FEC with pre‑FEC BER 2.4×10⁻⁴ for improved link performance

6. Max power consumption only 9 W for high‑density deployment

7. LC‑Duplex optical receptacle

8. Up to 2 km transmission over G.652 single‑mode fiber

9. Commercial temperature range: 0 °C ~70 °C

10. Single +3.3 V power supply

11. QSFP‑DD MSA rev5.0 compliant hot‑pluggable form factor

12. Conforms to IEEE 802.3cu 400GBASE‑FR4 and 100G Lambda MSA

13. CMIS4.0 DDMI over I2C for comprehensive digital diagnostic monitoring

14. RoHS‑compliant, Class 1 eye‑safe laser output

Application Scenarios


1. Intra‑data‑center network

2. 400G Ethernet leaf‑spine fabric

3. Short‑reach 400G SMF links up to 2 km

4. 400G optical port for routers and switches




More Products
Products Centre, Browse products categories
More >>>>
Consult
Any questions, please contact us
Contact us >>>>
粤ICP备16040392号 Shenzhen Link-all Technology Co., Ltd, 2026 ©
CallQQProductsConsulting
whatsapp: (86) 136 823 233 60
+86 755 26508812