Click to open expanded view
800G CFP2 DCO coherent optical transceiver with 130GBd PS‑16QAM, C-band, for DCI, metro and OTN transport networks
LACF2-DCO-800G
Highlights:
✅This moduel is Integrated native ZTE DSP
✅ 800G CFP2 DCO, 130GBd PS‑16QAM modulation
✅ Optional C-band / C+L band, backward compatible with 400G
✅ Optimized for DCI, metro and OTN carrier transport
Compatible with
Cisco
Ciena
Juniper
H3C
Dell
HP
Or customized
Inquire Now
Specification
  Transceiver Type:
  Coherent DCO Transceiver
  Form Factor:
  CFP2
  Nominal Line Rate:
  800 Gbit/s
  Symbol Rate:
  130 GBd
  Modulation Scheme:
  Probabilistic Shaping 16QAM (PS‑16QAM)
  Rate Interoperability:
  800G / 400G 
  Digital Signal Processor:
  Integrated ZTE DSP
  Optical Band:
  Optical Band: C-band or C+L wide band option
  Optical Interface:
  LC duplex, Single-mode fiber
  Power Dissipation:
  28 ~ 35 W (typical)
  Standards:
  CFP2 MSA Specification
  Operating Temperature:
  0°C to +70°C
Main Features

1, Native integrated ZTE coherent DSP inside the transceiver, no external host-side DSP required. It integrates advanced coherent algorithms including adaptive equalization, chromatic dispersion compensation, PMD compensation, fiber nonlinearity compensation, probabilistic shaping engine and high-performance FEC. The optical engine is co-optimized with ZTE DSP to deliver stable transmission performance and superior OSNR margin.


2, CFP2 MSA compliant hot-pluggable DCO coherent transceiver.


3, Nominal line rate of 800 Gbit/s at 130 GBd symbol rate with Probabilistic Shaping 16QAM (PS‑16QAM) modulation. Probabilistic shaping technology improves spectral efficiency and extends transmission reach compared with conventional uniform 16QAM. Software configurable multi-rate interoperability: 800G / 400G, backward compatible with legacy 400G networks.


4, Optional optical band: standard C-band or extended C+L wide band. Equipped with tunable DWDM laser compliant with ITU-T grid, supporting ROADM and flexible grid networking.

LC duplex optical interface for single-mode fiber (SMF).


5, Built-in Digital Optical Monitoring (DOM) function. Real-time monitoring of Tx/Rx optical power, module temperature, laser bias current, supply voltage and configurable alarm thresholds for remote O&M and rapid fault localization.


6, Typical power dissipation: 28 ~ 35 W.


7, Operating case temperature range: 0°C ~ +70°C, telecom-grade design for stable operation in central office and data center chassis.


8, Optimized for line-side transport scenarios: DCI (Data Center Interconnect), metro optical network and OTN carrier transport, suitable for cloud interconnection, metro aggregation trunk and OTUCn service bearing.

Application Scenarios

This 800G CFP2 DCO transceiver with 130 GBd PS‑16QAM and native integrated ZTE DSP is purpose-built for high-capacity coherent line-side DWDM transmission. With multi-rate support (800G/400G/200G), optional C-band / C+L band, tunable wavelength and excellent OSNR performance, it flexibly serves the following carrier and data center transport use cases:

1. DCI – Data Center Interconnect

It is deployed as the line-side coherent interface for interconnections between geographically separated cloud data centers, supercomputing centers and colocation sites. Cloud operators need large, low-latency, high-reliability pipes to carry east-west traffic, storage replication, virtual machine migration and cross-region service synchronization. The 800G capacity greatly reduces the quantity of fibers and wavelengths required between sites. Its backward compatibility with 400G allows gradual capacity upgrade: operators can start with 400G links and upgrade to 800G via software configuration without swapping transceivers. The C+L band option further multiplies fiber capacity for dense DCI clusters.

2. Metro Optical Transport Network

For metro DWDM and metro OTN networks covering city-wide aggregation and trunk links. Metro networks feature mixed fiber spans, diverse link distances, many ROADM nodes and frequent service reconfiguration. The tunable DWDM laser, ITU-T grid compliance and support for ROADM/flexible grid make this CFP2 DCO well suited for metro ring and mesh topologies. It aggregates traffic from 5G/6G base stations, enterprise leased lines, residential broadband and local cloud nodes. Carriers can provision 200G, 400G or 800G wavelengths on demand on the same platform, balancing capacity investment and service growth. The 0~70°C case temperature rating adapts to central offices and outdoor telecom cabinets in metro sites.

3. OTN Line-Side for Carrier Backbone & Aggregation

Used as the OTUCn line-side interface on OTN transport equipment. It carries standard OTN framed services, providing hard isolation, performance monitoring and end-to-end OAM for carrier-grade services. Telecom operators deploy it on OTN trunk and aggregation boards to transport high-value services including private lines, financial dedicated circuits, broadcast video and carrier backbone IP traffic. The built-in ZTE DSP with advanced FEC, dispersion and PMD compensation handles complex fiber transmission impairments on long-haul and multi-span OTN routes. DOM monitoring enables OTN management systems to collect real-time optical parameters and raise pre-fault alarms, improving the stability of carrier core transmission.

4. Open Line System (OLS) and ROADM-based DWDM Networks

Thanks to the standard CFP2 MSA interface and tunable coherent design, this DCO works with open DWDM line systems and ROADM architectures. It decouples the transponder function from the optical line hardware, helping operators build open, disaggregated optical transport networks. The C+L wide-band variant is ideal for high-channel-count DWDM systems where maximizing fiber spectrum resource is the top priority.

Capacity Upgrade & Legacy Network Migration

A key scenario is smooth migration from existing 200G/400G coherent networks to 800G. Since the module supports software rate switching, carriers can roll out new services at 800G on the same shelf while keeping existing 400G wavelengths running, avoiding forklift replacement of all transceivers at once. This lowers CAPEX and service interruption risk during network evolution.

More Products
Products Centre, Browse products categories
More >>>>
Consult
Any questions, please contact us
Contact us >>>>
粤ICP备16040392号 Shenzhen Link-all Technology Co., Ltd, 2026 ©
CallQQProductsConsulting
whatsapp: (86) 136 823 233 60
+86 755 26508812