UC6100-NMC：
Embedded software on the NMC
Supports CLI based, Web-based and SNMP management option
UC6100-2SFP：
2 SFP ports
Rate of up to 3.2Gbps, include 10/100/1000M Ethernet
STM-1/4/16, FC-1/2, OC-1/3/6/12/48
UC6100-3SFP：
3 SFP ports, with APS function
Switch-over time < 50ms
Rate of up to 3.2Gbps, include 10/100/1000M Ethernet
STM-1/4/16, FC-1/2, OC-1/3/6/12/48
UC6100-2SFP+：
2 SFP+ ports
Rate of the range from 8.5Gbps to 11.3Gbps, include Ethernet,
Fiber Channel, OTU, OC-192/STM-64, G.709 OTU2, G.709 OTU2e
UC6100-3SFP+：
3 SFP+ ports, with APS function
Switch-over time < 50ms
Rate of the range 8.5Gbps to 11.3Gbps, include Ethernet，Fiber
Channel, OTU, OC-192/STM-64, G.709 OTU2, G.709 OTU2e
UC6100-OP：
Intelligent Fiber Optical Switch Card, Provide 1+1 protection,
uni-directional switching Switch-over time< 20ms
UC6100-2TSFP+:
1 SFP+ port, 1 10GBase-T port 10G Ethernet Media Converter 10G
Base-T to 10G Base-R SFP+
1. 3U 19” 19-slot chassis with 1 slot for Network Management Card
(NMC), 15 slots for Line cards, 2 slots for Power and 1 slot for Fan
modules
2. 1U 19” 8-slot chassis with 1 slot for Network
Management Card (NMC), 5 slots for Line cards and 2 slots for Power & Fan
modules
3. 2-slot mini-chassis with 1 slot for Network Management Card
(NMC) and 1 slot for Line card
4. All modules and line cards are hot-swappable
5. Support power redundancy with load sharing mechanism, and also
AC/DC power options
6. Configurable and scalable features:
-Use different SFP modules for line card, and
adjust data rates as needed
7. Fully 3R (Re-amplify, Re-shape and Re-clock) based design.
Perform full 3R signal regeneration and is protocol transparent
8. Support out-of-band management via Web-based, CLI(Local Console
or Telnet ) and SNMP(V1,V2C and V3) management
9. Support system log
10. Support remote firmware upgrade
11. Various SFP/SFP+ options support Digital Diagnostic Monitoring
Interface(DDMI)
12. Programmable link fault pass-through (LFP), or referred to as
remote fault detection (RFD) feature
13. Remote power on/off detection with dying gasp alarm
14. APS line protect function with less than 50 ms switch-over
time
15. Loopback capability for link integrity test, support both line
side loopback and client side loopback
16. Support hardware management such as chassis info, system info,
line card type, card version, card location, port description etc.
17. Alarm for link status, card plug-in/remove and power on/off
18. Various applications -media conversion, signal repeating,
wavelength conversion, redundant links.
Scenario1 ：P2P case
Scenario2 ：Standalone case
